使用本機注意事項：
    1、粉碎機應固定在鋼制或木制磨架上；
    2、使用三通出料口，兩個袋子不得短于5米；
    3、被粉碎的物料應清除夾雜的石塊、鐵塊；
    4、料物堵塞時嚴禁用手和鐵棒拔料；
    5、更換錘片用稱稱好，四組錘牌平衡好；
    6、掛皮帶前注意旋轉方向，嚴禁反轉；
    7、工作前向兩軸承加油，不準超負荷工作；
    8、紅色均為警告標志，均勿靠近伸手。
Points for Attention of Using the Machine:
    1、The crusher shall be fastened on the steel or wood framework;
    2、Use three-way discharging hole, 2 bags shall not be less than 5 m;
    3、The materials crushed shall be cleaned from stones and iron blocks;
    4、It’s strictly prohibited to touch the machine with hand or use steel iron to touch.
    5、Weigh the hammer piece with scale, and properly balance the four groups of hammer of the scale
    6、Pay attention to the rotation direction before installing the strap and reverse is prohibited;
    7、Refill lubricant oil into both bearings before working, it’s allowed to work overload;
    8、All red marks are warnings, please don’t touch with hand.