產品簡介 Product Introduction

雨停回填寶回填找平材料采用高分子聚合物、砂漿穩定劑精制而成，現場加水和水泥經專用攪拌機混合而成，是一種含有大量封閉氣孔的新型輕質材料，具有質量輕、強度高、不收縮、抗開裂、阻水耐久的優異特性，解決衛浴間沉箱積水、地面找平、減輕建筑負重，達到環保節能、省工、省料的理想效果。

The YUTING backfill treasure of macromolecule polymer, slurry stabilizer refined but become, special field water and cement mixer, which is a mixture is a new type of lightweight materials containing a large number of closed pores, with light mass, high strength, no shrinkage, crack resistance, water resistance excellent properties of endurance, solving caisson water between wei yu, ground leveling, reduce building load, achieve environmental protection and energy saving, of the province, the ideal effect.

性能特點 Product Feature

·抗壓強度高，現場整體澆注，內外一致，不收縮、不開裂、抗壓強度可達1mp以上。

·流動效果好，攪拌好的漿料注入基面具有良好的流動性，有效填封管道周邊縫隙，封堵沉箱防水層施工無法做到位的死角。

·阻水耐久，吸水率低，表面明顯的荷葉效果，氣孔獨立不串通，有效阻隔水的流通，主要成分為水泥，與主體結構同壽命。

? high compressive strength, overall pouring on site, internal and external consistency, no shrinkage, no cracking, compressive strength can reach above 1mp.

? good flow effect, good flow of the slurry injected into the base surface, effective sealing of the surrounding cracks of the pipe, sealing off the blind Angle of the caisson waterproof layer, which cannot be achieved.

? durable water resistance, low water absorption rate, obvious lotus leaf effect on the surface, independent and non-collusion pores, effectively blocking the flow of water, the main composition is cement, with the same life as the main structure.

適用范圍 Range of Application

·衛浴間沉箱回填、房間客廳地面找平、屋面防水層保護隔熱等施工。

? refilling of caisson between bathroom and bathroom, leveling of the living room floor, roof waterproof layer protection and heat insulation, etc.

施工程序與方法 Construction Procedure

·在攪拌容器內倒入40公斤水，開動攪拌機到高速擋，倒入一袋A料攪拌5分鐘，泡沫到達標準位置，調到低速擋運行，緩緩加入50公斤水泥，再加入B料充分?jǐn)嚢?span>5分鐘至均勻的膏糊狀。

·打開閥門把漿料注入沉箱或基面，流到指定位置后關閉閥門，用刮板稍稍刮平待其表干。

? pour 40kg of water into the mixing container, start the mixer to high speed, add one bag of material A and B, and stir for 3 minutes. When the foam reaches the standard position, adjust to low speed, slowly add 50kg of cement, and stir well for 3-5 minutes until the paste is smooth and smooth.

? open the valve and inject the slurry into the caisson or base surface, flow to the designated position and close the valve.

注意事項 Notice

·施工前請仔細閱讀包裝說明，按規定流程操作。

·加入32.5R與42.5R水泥干固時間和強度會有所差異，如工期較緊建議使用42.5R水泥施工。

·澆注完工未完全干固禁止踩踏，以免影響施工效果。

·施工完成后立即清洗干凈機器和閥門，以免水泥結塊堵塞閥門。

·嚴禁開機后伸手入機器桶內，以防發生意外。

? please read the packing instructions carefully before construction and operate according to the specified procedures.

? adding 32.5r and 42.5r will have differences in drying time and strength. If the construction period is tight, 42.5r cement is recommended for construction.

? no trampling is allowed if the pouring is not completely dry, so as not to affect the construction effect.

? clean the machine and valve immediately after construction to avoid clogging the valve with cement.

? it is strictly forbidden to reach into the machine barrel after starting up, in case of accident.